|
|
|
|
|
|
Public Safety Multipoint Series |
4.9GHz
WirelessGRID Series - Designed for use
in public safety networks, WirelessGRID
FCC Part 90 type-approved outdoor
wireless multipoint operate in
4.94-4.99GHz, 5.25-5.35 GHz, 5.47-5.72
GHz, and 5.725-5.850 GHz frequency
bands.
|
 |
|
|
|
|
WirelessGRID Model #: AI108-4958-ON2-PS
(Base station/repeater).
The AI108-4958-ON2-PS outdoor base
station/repeater unit is designed for public
safety use where wireless repeating or
multipoint communication is needed.
Utilizing standards-based hardware
technology and proprietary multipoint
bridging software, the AI108-4958-ON2-PS
provides up to 24 Mbps of TCP/IP throughput,
and supports both repeater mode and base
station mode. Utilizing the 4.94-4.99,
5.25-5.35, 5.47-5.72 (ETSI), or 5.725-5.85
GHz frequency bands, each base
station/repeater includes an indoor
signal/power injector, 150 feet of
indoor-to-outdoor cable, an outdoor radio
with 2 N-type female bulkhead connectors, 2
x 6ft RF cables, and 2 x 60, 90, 120 degree
Sector, 360 degree Omni, or directional
antenna options are ordered seperately.
|
 |
|
|
WirelessGRID Model#: AI108-4958-BSU_PS
(Base station).
The AI108-4958-BSU-PS outdoor base station
unit is designed for public safety use where
wireless multipoint communication is needed.
Utilizing standards-based hardware
technology and proprietary multipoint
bridging software, the AI108-4958-BSU-PS
provides up to 24 Mbps of TCP/IP throughput,
and supports up to 32 subscriber units.
Utilizing the 4.94-4.99, 5.25-5.35,
5.47-5.72, or 5.725-5.85 GHz frequency
bands, each base station includes an indoor
signal/power injector, 150 foot
indoor-to-outdoor cable, an outdoor radio
with N-type female connector, 6ft RF cable,
and 60, 90, 120 degree Sector, or 360 degree
Omni antenna options (purchased seperately)
for fast and reliable multipoint
communication. |
 |
|
|
WirelessGRID Model#: AI108-4958-ET1
Wireless E1 Radio Link.
The New wireless WirelessGRID T1/E1 Radio
Link is designed to seemlessly integrate
legacy TDM and Ethernet data services over
one wireless link. It has integrated Quality
of Service (QOS) and is designed for service
providers and enterprises that require
immediate deployment in 4.9GHz FCC Part 90
licensed public safety and license exempt
frequencies in FCC, Industry Canada, and
ETSI markets.
The quality of TDM signals is maintained
under extreme latency and jitter conditions
in the network. TDM signals are also
protected against all load conditions of the
Ethernet data service. Non active TDM
signals and non-active time slots do not
consume bandwidth over the air. The idle
bandwidth is available for IP data
applications. |
 |
|
|
WirelessGRID Model#: AI108-4958-MSU-PS
(Mobile Subscriber Unit).
The AI108-4958-MSU-PS mobile subscriber unit
(mobile client) is designed for public
safety use where wireless multipoint
communication is needed between base
stations / mobile command centers and
vehicles or between vehicles. This unit
features a ruggedized aluminum enclosure,
integrated vehicle mount bracket, 12 volt
fused vehicle power connectors, and 15ft of
Ethernet cable.
The AI108-4958-MSU-PS provides up to 24 Mbps
of TCP/IP throughput for mobile and hotspot
communication in the 4.94-4.99, 5.25-5.35,
and 5.725-5.85 GHz frequency bands.
|
 |
|
|
WirelessGRID Model#: AI108-4958-OSU-PS
(Outdoor subscriber unit).
The AI108-4958-OSU-PS outdoor subscriber
unit (client) is designed for public safety
use where wireless multipoint communication
is needed. Utilizing standards-based
hardware technology and proprietary
multipoint bridging software, the
AI108-4958-OSU-PS provides up to 24 Mbps of
effective throughput for multipoint
communication utilizing the 4.94-4.99,
5.25-5.35, 5.47-5.72 (ETSI), or 5.725-5.85
GHz frequency bands. Includes an indoor
signal/power injector, 150 foot
indoor-to-outdoor cable and integrated
outdoor radio/21 dBi antenna for multipoint
communication up to 2.5 miles (4km).
|
 |
|
|
WirelessGRID Model#: AI108-4958-SU-PS
(Indoor subscriber unit).
The AI108-4958-SU-PS indoor subscriber unit
(client) is designed for public safety use
where wireless multipoint communication is
needed. Utilizing standards-based hardware
technology and proprietary multipoint
bridging software, the AI108-4958-SU-PS
provides up to 24 Mbps of effective
throughput for multipoint, hotspot or
location-to-location communication in the
4.94-4.99, 5.25-5.35, 5.47-5.72 (ETSI), and
5.725-5.85 GHz frequency bands.
|
 |
| |
|
|
|
|
|
|
Email Page
